NDAA-COMPLIANT SUPPLY CHAIN · FLAGSHIP IN SERVICE

NDAA
COMPLIANT FPV PROPELLERS MADE IN INDIA

Name: NDAA Compliant FPV Propellers (PQ 1053, 10 inch)
Brand: Precision Quad

NDAA-Compliant · Full Range 5" through 20" Tested by the Indian Army · Country-of-origin declaration on request

Precision Quad is India's specialist manufacturer of NDAA-compliant FPV propellers — the full 5" through 20" range, engineered, tooled and molded in India with no China-origin content, raw resin to rotor. The 10" flagship PQ 1053 is already in active service with the Indian Army; every other size on the line is built to the same standard. Available to qualified defense, OEM and commercial customers worldwide.

NDAA COMPLIANT FPV PROPELLERS · MADE IN INDIA

Request Quote → NDAA Compliance ↓

NDAA compliant 10-inch FPV propeller made in India, finished and inspected

UNIT // PQ 1053TRI-BLADE

DIA // 10.0"254 MM

CYCLE // INJ-MOLDSINGLE-PIECE

STATUSCLEARED FOR DEPLOY

01 · RANGE

The Full NDAA Compliant
FPV Propeller Range

SIZES · 5"–20"
STATUS · IN PRODUCTION

We don't make a propeller. We make the propeller line. Every size on the catalog comes off the same in-house line, the same hardened steel mold tooling, the same glass-reinforced resin compounded inside India. The 10" leads — already in service with the Indian Army — and the rest of the lineup is built to the same standard.

Cinewhoop

Long Range

10"

Flagship · In Service

13"

Heavy Lift

15"

Cargo

17"

Heavy Cargo

18"

Industrial

20"

Max Payload

Bespoke & OEM

Don't see your size?

Custom diameters, custom hub bores, custom pitches, OEM keying. Because we own the mold, we cut new tooling in days — not in shipping cycles. Tell us the airframe, the payload, the thrust envelope; we'll build to it.

Featured Flagship

The PQ 1053 · 10"

The proven product. Already turning rotors on Indian Army FPV platforms. Full technical spec in the next section — same precision in every size on the line.

See the flagship spec →

NDAA · COMPLIANCE

NDAA-Compliant
FPV Propellers

ORIGIN · INDIA
CHINA-ORIGIN CONTENT · NONE

Built for programmes that need China out of the bill of materials. Every Precision Quad propeller is designed, tooled, molded and inspected in India, so the propeller line item on your BOM is clean from the first page.

Made in India

Design, hardened steel mold tooling, injection molding, assembly and QA all happen at our Noida facility.

No China-origin content

Mold tooling, glass-reinforced resin compounding and assembly are done in India. Nothing in the propeller is sourced from the People's Republic of China.

Documents on request

Country-of-origin declaration, material statement and batch records for qualified buyers, ready to attach to your own compliance file.

Open to US and allied buyers

DoD and federal contractors, drone OEMs and integrators in the US, Europe and allied markets. Free samples available for evaluation.

What "NDAA-compliant" means here. There is no official NDAA certification for propellers. FY2020 NDAA Section 848 names China as the covered country for drone systems and lists parts such as flight controllers, radios, cameras and gimbals; propellers are not itemised, but procuring agencies can review the full bill of materials. We give you a country-of-origin declaration to document this line item. The final compliance decision rests with your procuring agency or prime contractor.

Request Compliance Documents →

02 · FLAGSHIP

The PQ 1053
10" Flagship

CODENAME · PQ 1053
TYPE · TRI-BLADE FPV

PQ 1053 · FINISHED Close-up of NDAA compliant FPV propeller hub, made in India

Cut from one piece.
Tuned for the fight.

The 10" PQ 1053 is the flagship of the Precision Quad range — the propeller that earned us active-service status with the Indian Army. Engineered for the rotational stresses of high-speed FPV combat platforms, it's injection-molded in a single shot from a glass-reinforced engineering polymer — sourced, compounded and pressed inside India. Each unit leaves the line balanced, weighed and laser-tagged for traceability. Every other size in the range is built to the same standard.

Diameter10.0 inch / 254 mm

ConfigurationTri-blade · Symmetric

Pitch5.0" std · custom on request

MaterialGlass-reinforced polymer (India-sourced)

ProcessSingle-shot injection · in-house mold

Hub BoreStandard FPV · custom keying

Balance Tolerance± 0.05 g per blade

Operating Temp−40°C to +60°C

QA100% inspection · serialized batch

03 · ORIGIN

From Block
to Blade

SHOP FLOOR · NOIDA
2026 · LIVE LINE

Most low-cost FPV propellers leave the buyer with one decision: which brand sticker goes on top. Every Precision Quad propeller — every size in the range — is the opposite. The steel mold tooling is cut in-house, the resin is sourced and compounded domestically, the press is ours, and the inspection bay is on the same floor — one short walk from raw block to wrapped unit. That's how we hold quality, IP and price across the whole line.

QA STAMP · BATCH 2026

100% IN-HOUSE

Mold · Resin · Press · QA

Tooling Cut

Hardened steel mold blocks machined to micron tolerance on our own CNC line. No outsourced tooling.

Cavity Lap & Match

Blade cavities lapped, dye-checked and matched. Parting line tuned by hand for clean release.

Inject & Press

Single-shot press of glass-reinforced polymer. Cycle, cool, eject — one piece, no glue, no joints.

Balance & Serialize

Each unit weighed, balance-checked, laser-tagged with batch ID. Tracked from press to user.

Two halves of the propeller injection mold

MOLD HALVES · A/B

Mold cavity detail with blade impression

CAVITY · BLADE IMPRESSION

Operator placing finished propeller in mold for inspection

FIT-CHECK · DYE TEST

POST-EJECT · CYCLE 247

02.1 · The Mold

The mold is the moat.

Most propeller "manufacturing" in India is actually finishing: parts arrive half-formed and get badged. We refused that path. We invested in cutting our own multi-cavity steel mold — the highest-cost, highest-skill part of the chain — because owning the mold is the only way to truly own the product.

The result: full design control, full IP, zero foreign dependency. If a blade profile needs tuning for a specific platform, we re-cut in days — not in shipping cycles.

Hardened tool steel · in-house CNC
Multi-cavity · single-shot
Designed for high-cycle endurance
Field-tunable blade geometry

LIVE FROM THE FLOOR

Mold open · part eject · cycle complete

REC · LIVE
CAM 04 · BAY 02 · NOIDA

04 · IN SERVICE

Already in
the Field.

END USER · INDIAN ARMED FORCES
STATUS · DEPLOYED

VERIFIED · OPERATIONAL

Tested by the Indian Army.

The PQ 1053 isn't waiting on a launch event — it's already turning rotors on operational FPV platforms in active service with the Indian Armed Forces. The same propeller you'd order today is the one flying right now in active operations. That's the real-world testing that makes it ready for European, NATO-aligned and global defense procurement.

Available to qualified defense, paramilitary, OEM and commercial customers in supported jurisdictions. Export and end-use are governed by applicable Indian regulations.

★

FIELD VERIFIED

In active deployment with Indian forces on operational FPV platforms.

⚙

SUPPLY-CHAIN SECURE

Zero foreign dependency. Mold, resin, press, QA — all on Indian soil.

⟁

IP SOVEREIGN

Design and tooling owned in-house. No licenses, no royalties, no leaks.

↻

RAPID ITERATION

Mold tweaks in days — not in container ships.

END-USER VERIFIED

10K+ FIELD HRS

100% INDIAN BUILD

0 IMPORTS

SAMPLE PROGRAM · LIVE

Free Samples. Test Before You Commit.

Get evaluation units shipped to your engineering bench — on us. Available to qualified defense, OEM, integrator and commercial buyers worldwide. Tell us your platform, motor KV and intended size; we'll send samples for live testing in your environment, in your numbers.

Any size in the 5"–20" range
Quantities sized for real bench & flight testing
No-obligation, no-cost evaluation
Worldwide shipping included

Request Free Samples → Response within 24 hrs · Direct to engineering

NDAA
COMPLIANT FPV PROPELLERS MADE IN INDIA